Holds the driveshaft where it should be. Isolation dampers minimize vibrations.
Fits 08+, 15+, and 22+ generation Impreza variants (all).
The Problem
The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its travel.
While that’s great for making sure no NVH makes it to the cabin, it doesn’t keep the bearing centered well under load,
allows the bearing to sag over time and ruin the driveshaft alignment, and creates slop in the driveline during shifts and throttle application.
Over time the OEM bushing sags and becomes brittle, eventually dry rotting and cracking. Even on the best-kept cars,
the stock bushing can start to from cracks in as little as 5-10 years. When the bushing lets go, it can lead to excessive vibration and
clunking and put more stress on the bearing. To make matters worse, the stock carrier is molded onto the center support bearing, so it’s not easy to replace
without special tools.
The first video below was recorded on a 2022 WRX with stock power levels. The 2nd video was recorded on a 2010 STI making around 450whp.
The shaft is not well-supported by the soft OEM carrier, so it’s allowed to travel off-center during rapid loading and unloading.
The Solution
This upgraded unit keeps the driveshaft firmly in place at all times, and its solid construction ensures it will never wear out.
The thick bushings ensure the driveshaft cannot move from center, maintaining driveshaft alignment at all times.
The Bushings
Two options are available for the bushings, both of which are many times over better than the stock bushing.
We’ve paid close attention to the NVH levels associated with this upgrade. After extensive design iterations, we’ve come up with
custom isolator bushings that separate the carrier from the body of the vehicle and mounting hardware. These carriers substantially reduce NVH levels.
The street bushings absorb most of the NVH from the drivetrain.
Some light NVH is possible at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it.
The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise.